 |
|
| |
|
| Accurate surveys in the harshest environments |
Reliable and
accurate in-process temperature surveying for solution heat treating,
annealing, brazing, homogenizing, decorating, tempering, forming,
frit sealing, normalizing, billet reheating, slab reheating, pressure
and vacuum processes and more.
Data Loggers
Highly
accurate, 130,000 data points, sophisticated noise reduction and rapid
sampling intervals make this a worthy successor to the original Tpaq.
- 8 or 10 channels
- 0.3ºC/ 0.5°F
accuracy
- 130,000 data readings
- Sampling interval
as low as 0.1 sec
- Real-time telemetry
option available
Q18
6 or 10 channel, fast sampling rate, Stop/Start buttons and ~18,000 readings per channel @ ±0.5°C accuracy gives process information you can trust.
XDL12
New external data logging solution to
furnace temperature uniformity surveys
in batch and vacuum furnaces
We
have the widest range of thermal barriers designed for a
variety of furnaces and processes, as well as hostile environments.
From a 41mm/1.6" high barrier that can protect for 7 minutes at
600°C/1100°F or a heavyweight that can withstand 800°C/1475°F
for 20 hours to barriers that can protect in reheat processes or quenches.
Contact
us to determine the best barrier for your process.
Floating PlateTM & high grade 310 stainless steel give
maximum protection with minimum distortion.
A balanced ratio of heat sink to insulation
thickness provides maximum thermal duration with minimal weight.
For high temperature, high frequency survey work. Maximum barrier reinforcing, gas flow venting, and removable gas quench deflector shields.
Furnace special thermal barriers
Custom manufactured thermal barriers to suit specific process requirements where a standard range thermal barrier would not be suitable
Slab/Billet
Reheat Thermal Barriers
High grade stainless steel insulation frame
houses multi stages of protection designed specifically for the demands
of hostile reheat processes.
Water/Polymer
Quench Thermal Barrier
Low height, high thermal capacity, unique
‘recharge’ design & able to handle 20 hrs @ 550°C /
1000°F
Special system for monitoring Controlled Atmosphere Brazing (CAB) in the aluminum brazing industry. It operates on the principle of monitoring the ambient temperature profile throughout the furnace rather than the product temperature.
Special Thermal Barrier for Aluminum Brazing in Vacuum Furnaces
Special system for aluminum
vacuum brazing, designed to allow regular profiling in the vacuum furnace without potential contamination caused by thermal barrier out-gassing.
Rotating water barriers are designed to operate in steel tube and aluminum log homogenizing processes.
Pressure Resistant Barrier for Autoclaves
The pressure resistant system has
been designed to allow regular profiling or surveying in autoclaves in a number of applications including
composite manufacture, windscreen manufacture, investment casting and vulcanising.
Reliable and
accurate in-process temperature surveying for solution heat treating,
annealing, brazing, homogenizing, decorating, tempering, forming,
frit sealing, normalizing, billet reheating, slab reheating, pressure
and vacuum processes and more.
Highly accurate, 130,000 data points, sophisticated noise reduction and rapid sampling intervals make this a worthy successor to the original Tpaq.
- 8 or 10 channels
- 0.3ºC/ 0.5°F accuracy
- 130,000 data readings
- Sampling interval as low as 0.1 sec
- Real-time telemetry option available
Q18
6 or 10 channel, fast sampling rate, Stop/Start buttons and ~18,000 readings per channel @ ±0.5°C accuracy gives process information you can trust.
XDL12
New external data logging solution to furnace temperature uniformity surveys in batch and vacuum furnaces
| We
have the widest range of thermal barriers designed for a
variety of furnaces and processes, as well as hostile environments.
From a 41mm/1.6" high barrier that can protect for 7 minutes at
600°C/1100°F or a heavyweight that can withstand 800°C/1475°F
for 20 hours to barriers that can protect in reheat processes or quenches.
Contact us to determine the best barrier for your process. |
|
|
|
|
|
Floating PlateTM & high grade 310 stainless steel give
maximum protection with minimum distortion. |
A balanced ratio of heat sink to insulation
thickness provides maximum thermal duration with minimal weight. |
|
|
|
|
|
|
For high temperature, high frequency survey work. Maximum barrier reinforcing, gas flow venting, and removable gas quench deflector shields. |
Furnace special thermal barriers Custom manufactured thermal barriers to suit specific process requirements where a standard range thermal barrier would not be suitable |
|
|
|
|
|
|
Slab/Billet Reheat Thermal Barriers High grade stainless steel insulation frame
houses multi stages of protection designed specifically for the demands
of hostile reheat processes. |
Water/Polymer Quench Thermal Barrier Low height, high thermal capacity, unique ‘recharge’ design & able to handle 20 hrs @ 550°C / 1000°F |
|
|
|
|
| Special system for monitoring Controlled Atmosphere Brazing (CAB) in the aluminum brazing industry. It operates on the principle of monitoring the ambient temperature profile throughout the furnace rather than the product temperature. | Special Thermal Barrier for Aluminum Brazing in Vacuum Furnaces Special system for aluminumvacuum brazing, designed to allow regular profiling in the vacuum furnace without potential contamination caused by thermal barrier out-gassing. |
|
|
|
|
| Rotating water barriers are designed to operate in steel tube and aluminum log homogenizing processes. | Pressure Resistant Barrier for Autoclaves The pressure resistant system hasbeen designed to allow regular profiling or surveying in autoclaves in a number of applications including composite manufacture, windscreen manufacture, investment casting and vulcanising. |
|
Software
Thermocouples
Insight
Software for Furnace Tracker
‘Nextel’
or Mineral Insulated Thermocouples
Insight software is a completely new software
package that has been developed by Datapaq to meet the needs of the
heat treating industry. As well as providing a dedicated
profiling and analysis package the software has two additional options
to suit your process:
- A comprehensive Real-Time
Monitoring Package with Telemetry.
- An advancedTemperature
Uniformity Survey Package.
Insight software is a completely new software package that has been developed by Datapaq to meet the needs of the heat treating industry. As well as providing a dedicated profiling and analysis package the software has two additional options to suit your process:
- A comprehensive Real-Time Monitoring Package with Telemetry.
- An advancedTemperature Uniformity Survey Package.